Publicidad
Idiomas disponibles
Idiomas disponibles
3.4
E levating Leg Rest
2 0 B
Gas cylinders allow the leg rest to be positioned
infinitely from horizontal to vertical. The leg rest
elevates and extends with recline on the Synthesis. It
is also independently adjustable.
To Adjust the Leg Rest:
-Hold leg rest to assist movement and squeeze the leg
rest handle.
-Raise or lower the leg rest to the desired angle.
The leg rest articulates with changes to the back
recline but not with changes to the seat tilt. If the back
is in the
reclined position, the leg rest cannot be lowered
independently.
3.5
F lip Down Footrest
2 1 B
The flip down footrest is removable and length
adjustable.
To Attach the Footrest:
-Insert the right end of the footrest upper cross piece into
the desired hole in the right side of the leg rest frame.
-Insert the left end of the footrest upper cross piece into
the corresponding hole in the left side of the leg rest
frame.
-Release the tension on the spring mechanism.
To Remove the Footrest:
-Lift up the footrest slightly to discontinue contact
between the straps on the footrest and the leg rest.
-Squeeze the footrest to the right to activate the spring
mechanism, and release the left and right side.
Footplate Angle Adjustment:
The footplates individually flip up to accommodate
transfers and are angle adjustable to accommodate foot
drop and ankle contractures.
WARNING: Do not attempt to stand on the
footplates.
To adjust the footplates less than 90º, extend the bolt as
indicated by A. To make the angle more than 90º,
shorten the bolt (as indicated by B)
1
A
B
12
Length
Adjustment
Increments
B
Publicidad
