Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS:
This hairdryer is provided with an appliance leakage circuit interrupter (ALCI) safety device built into the plug.
This device is designed to make the unit inoperable under some abnormal conditions, such as accidental immersion
in water. The ALCI safety device is equipped with a test button so that its operation can be checked.
This unit should be tested before each use to confirm that the safety device is operational.
TO TEST:
After plugging in your hairdryer:
1. Press the reset button on the ALCI device.
2. Press the test button. The reset button will pop out. This verifies that the safety device is operating properly.
3. Press the reset button to reactivate your ALCI safety device.
4. Your hairdryer is now ready for use.
Note: This unit may automatically trip when unplugged. If so, unit must be reset after it is plugged in.
After following the above testing procedure, should the indicator device not function properly, return the dryer to a
Service Center for examination and service .
Should the ALCI safety device trip (i.e. reset button pop out) during use, press the reset button. Should the dryer
fail to reset, return the dryer a Service Center for examination and service.
Never operate this appliance if it has been dropped in water; return it to a Service Center for examination and
service.
• The dryer is designed to work on ordinary household current only, 125 voltage, 60 cycles AC. It is intended for
professional use only.
• This appliance is equipped with an automatic thermal limiter which will cycle off when overheated and come
back on when cooled down. If the unit cycles off, unplug the cord for several minutes before restarting.
• This appliance has a polarized plug (one blade iswider than the other). As a safety feature, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to defeat this safety feature.
Switch settings
Type
583.03/I, 585.25/I,
586.25/I, 586.36/I,
587.24/I, 587.25/I,
588.25, 588.25/I,
Fan switch
0
1 = LOW air blow
2 = HIGH air blow
Temperature
1 = COOL (low) temperature
switch
setting
2 = MEDIUM temperature
setting
3 = HOT
temperature setting
Cool button
ON = Cool air setting
(for
hairdryer
fitted with
this device)
On/Off
button
SAVE THIS INSTRUCTIONS
METHOD OF OPERATION
583.04/I, 584.13/I, 585.26/I,
585.27/I, 585.27/IL, 586.26/I,
586.27/I, 586.27/IL, 587.26/I,
587.27/IL, 588.26, 588.26/I,
588.27, 588.27/I,
0
1 = LOW air blow
2 = HIGH air blow
1 = COOL (room) temperature
2 = MEDIUM temperature
3 = HOT
ON = Cool air setting
(low temperature)
setting
setting
temperature setting
(room temperature)
588.25/P, 588.25/IP,
0
1 = LOW air blow
2 = HIGH air blow
1 = COOL (low) temperature
setting
2 = MEDIUM temperature
setting
3 = HOT
temperature setting
On/Off (pressure must be
maintained to operate the
hairdryer)
588.26/P, 588.26/IP,
588.27/P, 588.27/IP
0
1 = LOW air blow
2 = HIGH air blow
1 = COOL (room)
temperature setting
2 = MEDIUM temperature
setting
3 = HOT
temperature setting
On/Off (pressure must be
maintained to operate the
hairdryer)
Publicidad
