Functional Description - Makita AF505N Manual De Instrucciones

FUNCTIONAL
DESCRIPTION
CAUTION:
• Always disconnect the hose before adjusting or
checking function on the tool.
Adjusting depth of nailing
A
► 1. Adjuster
To adjust the depth of nailing, turn the adjuster. The
depth of nailing is the deepest when the adjuster is
turned fully in the A direction shown in the figure. It will
become shallower as the adjuster is turned in the B
direction. If nails cannot be driven deep enough even
when the adjuster is turned fully in the A direction,
increase the air pressure. If nails are driven too deep
even when the adjuster is turned fully in the B direction,
decrease the air pressure. Generally speaking, the tool
service life will be longer when the tool is used with
lower air pressure and the adjuster set to a lower depth
of nail driving.
CAUTION:
• Always disconnect the hose before adjusting the
depth of nailing.
Hook
► 1. Hook
1
B
1
CAUTION:
• Always disconnect the hose from the tool.
• Never hook the tool at high location or on poten-
tially unstable surface.
The hook is convenient for hanging the tool temporarily.
ASSEMBLY
CAUTION:
• Always disconnect the hose before carrying out
any work on the tool.
• Load the same kind, size and uniform length of
nails when loading nails in the magazine.
Loading nailer
Press the lever and open the sliding door of the maga-
zine by pulling it toward yourself with the lever pressed.
Align the tip of nails with the grooves at the bottom of
the magazine and push the whole part of nails toward
the firing opening.
Close the sliding door.
5 ENGLISH