Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION (cont.)
BEFORE INSTALLATION
Check Water Supply Line
Check the water supply line that connects the toilet tank fill valve to the water
shutoff valve at the wall . If it is a rigid pipe, you will need to purchase a flexible
water supply hose to replace it before installing the PureSpa . The length of the
hose may vary, and the top connection size should be 7/8" Ballcock to connect to
the T-valve that you will install under the toilet tank, and the bottom connection will
vary (most common are 3/8" and 1/2" female compression) .
INSTALLING THE BIDET ATTACHMENT
1 . Remove existing toilet seat
a . Lift hinge covers and use flathead or Phillips
head screwdriver to remove the mounting
bolts . Alternatively, you may need to loosen
mounting bolts underneath the seat .
b . Remove the toilet seat and set the seat,
mounting bolts and hardware aside .
2 . Turn off water supply valve and flush toilet
a . Turn off water supply at the wall to stop flow
of water .
b . Flush toilet and hold down handle to
completely empty toilet tank .
c . Disconnect water supply hose from the fill
valve under the toilet tank .
5
https://manual-hub.com/
Step 1b
Step 2c
Publicidad
