Publicidad
Idiomas disponibles
Idiomas disponibles
6 . Connect Bidet Hose to Bidet Attachment
a . Connect open end of bidet hose to the
connection on the back side of the bidet
attachment .
7 . Turn on Water Supply and check for leaks
a . Open the main water supply valve slowly and check for leaks .
b . Wait 5-10 minutes, check again and if there are no leaks continue .
Note: if there is any leaking, check all rubber washers and make sure all water
connections are tight and secure. If necessary, you can use plumbers tape for
any leaking connections.
https://manual-hub.com/
Step 6a
8
Publicidad
