Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION - General information
The below description goes with the image on page 2.
1. Permanent filter
2. Filter holder
3. Pause-and-serve function
4. Glass pot lid
5. Glass pot
6. Measuring spoon
7. Water reservoir
8. Water-level indicator
9. Coffee maker housing
10. Power cord and plug
11. On/off button with indicator light
1. Unpack the device and remove all packaging parts.
2. Clean the device before using for the first time (see 'Cleaning and maintenance').
Operation
1. Place the appliance on a flat and steady surface.
2. This appliance must be connected to an earthed socket.
3. Open the lid of the water reservoir (7). Pour sufficient water into the reservoir (not less than 2 cups and
not more than 10 cups, as shown on the water-level indicator (8).
4. Use the permanent filter (1) or put a paper filter (1 x 4) in the filter holder. Fill the paper filter with the
required amount of ground coffee (the customary quantity is 1 level scoop (6) for each cup).
5. Connect the plug (10) to the wall socket. Switch on the appliance by pushing the On/Off-button (11).
The indicator light will now illuminate and the coffee will be prepared.
6. The pause-and-serve (3) function enables you to pour a cup of coffee before the coffee maker has
finished. Replace the glass pot quickly, to prevent the filter from overflowing.
7. The coffee machine automatically stops when the brewing is done. If you wish to halt the brewing
prematurely, you can push On/Off again. The indicator light will extinguish.
8. Remove the plug from the wall socket.
WARNING:
•
Allow the appliance to cool down before using it to brew additional coffee!
CLEANING AND MAINTENANCE
1. Switch off the appliance, take the plug out of the socket, and allow the coffee maker to cool.
2. Open the filter holder. Dispose of the paper filter or remove the permanent filter from the casing, clean
it in warm water and dry it thoroughly.
3. Remove the opened filter holder from the housing and clean it with warm water and dish soap. Then
rinse well with clean water and dry thoroughly. Place the filter holder back in the housing and put the
permanent filter back.
4. Clean the glass pot in hot washing-up water.
5. Clean the outside of the appliance with a damp cloth. Make sure no moisture gets into the appliance.
WARNING:
•
Only the glass pot, permanent filter and filter holder may be immersed in water and are dishwasher
safe.
•
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
Descaling
Limescale can reduce the efficiency of your coffee maker. Limescale is common in areas with hard water.
We advise the use of a suitable descaling agent to remove any scale. Always follow the instructions for the
descaling agent. The amount of scale will be reduced when you use a water softener.
14
14
EN
EN
Publicidad
