Silvercrest SBFL 5 A1 Guía Breve página 21

. Charging the device
Charge the battery of the bicycle speaker fully before using it for the
first time.
Connect the USB-C plug of the supplied USB charging cable to
the port on the device (see Fig. D).
Insert the USB-A plug into a suitable USB port.
Charge the device as soon as the status LED flashes red.
Charge the speaker only with a USB power adaptor that
corresponds to the technical specifications. Charging via
the USB port of a PC or laptop is not possible.
While the device is being charged, the status LED is red and the status
LED switches off when the device is fully charged (see Fig. E).
. Attaching the mounting clip
Insert the mounting clip into the device as shown in Fig. F.
The mounting clip must click audibly into place.
The mounting clip does not need to be removed from the device for
further use. Should it become necessary to remove the mounting clip,
proceed as follows:
English - 