Parkside PRFMA 20-Li A1 Instrucciones De Funcionamiento página 32

GB MT
Charging an external device
via USB
Only external devices can be charged via
the USB port (5). This USB port (5) cannot
be used to play back audio.
Switching on/off
Switching on the device
1. Press the power button (10). The dis-
play (2) lights up.
Switching off the device
2. Press the power button (10). All play-
backs stop and the display (2) switches
off.
Operation
Ensure that the ambient tem-
perature does not exceed
25°C or fall below 0°C during
operation.
Setting the volume
When switching on/off, the volume auto-
matically changes to a preset value.
Increasing the volume
1. Turn the volume knob (3) in a clockwise
direction.
Reducing the volume
2. Turn the volume knob (3) in an anti-
clockwise direction.
Switching playback mode
Press the Source button (7) repeatedly. The
radio will now cycle through the available
playback modes (AM, FM and Bluetooth
The radio switches to AUX mode as soon
as the jack cable (21) is plugged into the
AUX port (6). AUX mode is only available
32
for selection when the jack cable is con-
nected.
Operating as a radio
(FM/AM)
Pull up the antenna (1) so that it is vertical.
Press the source button (7) repeatedly until
the display (2) shows "FM" or "AM".
Station search
Automatic search
1. Press and hold the Tune button (2) for
approx. 2 seconds. All stored stations
are deleted and the radio now auto-
matically scans the frequency band for
up to 30 receivable stations.
2. Press the Preset button/TWS (8). The
list of stations is now shown on the dis-
play.
3. Press the NEXT / PREV button (11/14)
to scroll through the list entries.
Alternatively, you can also scroll
through the list by turning the volume
control knob (3).
4. Push the volume control knob (3) to
confirm the station selection.
Semi-automatic search
• Press and hold the NEXT button (11).
The radio now automatically searches
for the next receivable signal in as-
cending order.
• Press and hold the PREV button (14).
The radio now automatically searches
for the next receivable signal in de-
scending order.
).
®
If you press the NEXT / PREV button
(11/14) again during the search, the
search will stop early.