Parkside PRM 1800 C3 Instrucciones De Utilización Y De Seguridad página 36

Safety
tool parts, or putting the
power tool away. This precaution
helps prevent unintentional starting of
the power tool.
- Keep power tools out of the
reach of children when not in
use. Whoever is not familiar
with the power tool or who
has not read these instructions
should not be allowed to use it.
Power tools are dangerous if used by
inexperienced persons.
- Power tools and insert tools
must be subject to careful
maintenance. Check whether
moving parts function properly
without jamming, and whether
parts are broken or damaged
to such an extent that they
impair the functions of the
power tool. Have damaged
parts repaired before using
the power tool. Many accidents
happen due to poorly maintained
power tools.
- Keep cutting tools sharp and
clean. Carefully maintained cutting
tools with sharp blades tend to jam
less and are easier to guide.
- Use power tools, insert tools,
insert tool parts, etc. according
to these instructions. While
doing so, take into account the
working conditions and the
activity to be performed. The
use of power tools for applications
36 GB/IE/NI/CY/MT
other than those intended can lead to
dangerous situations.
- Keep handles and grip
surfaces dry, clean and free of
oil and grease. Slippery handles
and grip surfaces hinder safe opera­
tion and control of the power tool in
unforeseen situations.
Service
- Have your power tool serviced
by a qualified repair person
using only identical replace­
ment parts. This will ensure that the
safety of the power tool is maintained.
Safety notices for the
lawnmower
- Do not use the lawnmower in
bad weather, particularly not
in thunderstorms. This reduces the
risk of being struck by lighting.
- Thoroughly check the working
area for any wild animals. Wild
animals may be injured by the
running lawnmower.
- Thoroughly check the working
area and remove any stones,
branches, wires, bones and
any other foreign objects.
Ejected parts may cause injuries.
- Prior to use of the lawnmower
always check whether the
blades and the blade mecha­
nism are worn or damaged.