6
Initial setup wizard
When turned on for the rst time, a search for accessories will be performed before the initial setup starts.
Follow the on-screen informations to pair your remote control and other wireless accessories with your TV. To
pair your remote press and hold the Source button for about 5 seconds. Press Exit to end adding accessories
and start the setup. After that welcome screen will be displayed. Select your language and press OK. Follow
the on screen instructions to set your TV and install channels. The installation wizard will guide you through
the setup process. You can perform initial setup anytime using the Reset option in the Settings>Device
Preferences menu. You can access the Settings menu from the Home Screen or from the TV options menu
in Live TV mode.
Accessories Included
Remote Control
Batteries: 2 x AAA
Quick Start Guide
Feature Overview
Multi Media Player
Browse the media content stored on USB devices
that are connected to your TV or on mobile devices
that are connected to the same network as your TV
using the MMP app
Common Interface
Decode encrypted digital TV channels with a Condi-
tional Access Module(CAM) and a card provided by
a digital TV service operator
USB Recording
(**)
Record your favourite TV programmes
Electronic Programme Guide
Display the scheduled digital TV programmes
CEC
Control basic functions of the connected HDMI-CEC
compatible audio/video devices with the remote
control of the TV
HbbTV
Access to HbbTV services (services are dependant
on broadcast)
Apps
Access the applications installed on your TV, add
more from the market
Google Cast
With the built-in Google Cast technology you can
cast the content from your mobile device straight to
your TV.
Voice Search
(**)
You can start a voice search using your remote's
built-in microphone
®
Bluetooth
(**)
Connect audio devices or remote controller wirelessly
to your TV.
(**) Limited Models Only
High Dynamic Range (HDR) / Hybrid
Log-Gamma (HLG)
Using this feature the TV can reproduce greater
dynamic range of luminosity by capturing and then
combining several di erent exposures. HDR/HLG
promises better picture quality thanks to brighter, more
realistic highlights, more realistic colour and other
improvements. It delivers the look that lmmakers
intended to achieve, showing the hidden areas of
dark shadows and sunlight with full clarity, colour
and detail. HDR/HLG content is supported via native
and market applications, HDMI, USB inputs and
over DVB-S broadcasts. When the input source is
set to the related HDMI input press the Menu button
and set the HDMI EDID Version option in the TV
Options>Settings>Device Preferences>Inputs
menu as EDID 2.0 or Auto EDID in order to watch
HDR/HLG content, if the HDR/HLG content is received
through an HDMI input. The source device should
also be at least HDMI 2.0a compatible in this case.
Dolby Vision
Dolby Vision™ delivers a dramatic visual experience,
astonishing brightness, exceptional contrast, and vivid
colour, that brings entertainment to life. It achieves this
stunning image quality by combining HDR and wide
colour gamut imaging technologies. By increasing the
brightness of the original signal and using a higher
dynamic colour and contrast range, Dolby Vision
presents amazing true-to-life images with stunning
detail that other post-processing technologies in the
TV aren't able to produce. Dolby Vision is supported
via native and market applications, HDMI and USB in-
puts. When the input source is set to the related HDMI
input press the Menu button and set the HDMI EDID
Version option in the TV Options>Settings>Device
Preferences>Inputs menu as EDID 2.0 or Auto
EDID in order to watch Dolby Vision content, if the
Dolby Vision content is received through an HDMI
input. The source device should also be at least
HDMI 2.0a compatible in this case. In the Picture
Mode menu three prede ned picture modes will be
available if Dolby Vision content is detected: Dolby
Vision Bright, Dolby Vision Dark and Dolby Vision
Vivid. All allow the user to experience the content in
English - 7 -
the way the creator originally intended with di erent
ambient lighting conditions. To change the Picture
Mode setting press the Menu button while watching
the Dolby Vision content and go to Picture menu.
While watching Dolby Vision Content via an applica-
tion, except YouTube, Net ix and Multi Media Player,
you will not be able to access the Picture menu and
set the Picture Mode.
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
In extreme weather (storms, lightning) and long inactivity
periods (going on holiday) disconnect the TV set from the
mains.
The mains plug is used to disconnect TV set from the mains
and therefore it must remain readily operable. If the TV set is
not disconnected electrically from the mains, the device will
still draw power for all situations even if the TV is in standby
mode or switched o .
Note:
IMPORTANT - Please read these instructions
fully before installing or operating
WARNING: This device is intended to be
used by persons (including children) who are
capable / experienced of operating such a device
unsupervised, unless they have been given
supervision or instruction concerning the use of
the device by a person responsible for their safety.
Use this TV set at an altitude of less than 5000
metres above the sea level, in dry locations and in
regions with moderate or tropical climates.
The TV set is intended for household and similar
indoor use but may also be used in public places.
For ventilation purposes, leave at least 5cm of free
space around the TV.
The ventilation should not be impeded by covering
or blocking the ventilation openings with items, such
as newspapers, table-cloths, curtains, etc.
The power cord/plug should be easily accessible. Do
not place the TV, furniture, etc. on the power cord.
A damaged power cord/plug can cause re or give
you an electric shock. Handle the power cord by the
plug, do not unplug the TV by pulling the power cord.
Never touch the power cord/plug with wet hands
as this could cause a short circuit or electric shock.
Never make a knot in the power cord or tie it with
other cords. When damaged it must be replaced,
this should only be done by quali ed personnel.
Do not expose the TV to dripping or splashing of
liquids and do not place objects lled with liquids,
such as vases, cups, etc. on or over the TV (e.g. on
shelves above the unit).
Do not expose the TV to direct sunlight or
do not place open ames such as lit candles
on the top of or near the TV.
Do not place any heat sources such as electric
heaters, radiators, etc. near the TV set.
Do not place the TV on the oor or inclined surfaces.
To avoid danger of su ocation, keep plastic bags
out of the reach of babies, children and domestic
animals.
Carefully attach the stand to the TV. If the stand is
provided with screws, tighten the screws rmly to
prevent the TV from tilting. Do not over-tighten the
screws and mount the stand rubbers properly.
Do not dispose of the batteries in fire or with
hazardous or ammable materials.
WARNING
Batteries must not be exposed to excessive heat
such as sunshine, re or the like.
Excessive sound pressure from earphones or
headphones can cause hearing loss.
ABOVE ALL - NEVER let anyone, especially chil-
dren, push or hit the screen, push anything into
holes, slots or any other openings in the TV.
Serious injury or death risk
Caution
Dangerous voltage risk
Risk of electric shock
Important maintenance
Maintenance
component
Markings on the Product
The following symbols are used on the product as
a marker for restrictions and precautions and safety
instructions. Each explanation shall be considered
where the product bears related marking only. Note
such information for security reasons.
Class II Equipment: This appliance is
designed in such a way that it does not require
a safety connection to electrical earth.
Hazardous Live Terminal: The marked
terminal(s) is/are hazardous live under normal
operating conditions.
Caution, See Operating Instructions: The
marked area(s) contain(s) user replaceable
coin or button cell batteries.
Class 1 Laser Product: This
product contains Class 1 laser
source that is safe under reason-
ably foreseeable conditions of
operation.
English - 8 -