DJI C10000 Guía De Usuario página 6

Status LEDs
1
2
3
Status LED
Charging Channel
Status LED
DC Module Status
LED
Generator (excl. DC
Module)/AC Module
Status LED
• When the status LEDs blink for warning or error, connect the power supply to the remote
controller using a USB-C cable to see more information.
• If any part of the power supply is abnormal or damaged, it is recommended to contact a DJI-
authorized dealer or DJI Support to repair or replace the part.
4
1. Charging Channel Status LED
2. DC Module Status LED
4
3. Generator (excl. DC Module)/AC Module Status LED
4. USB-C Connector Cover
Blinking Pattern
Solid yellow
Blink green once continuously
Solid green
Blink yellow once continuously
Blink red once continuously
Blink yellow four times
continuously
Blink yellow once continuously
Blink red once continuously
Blink yellow four times
continuously
Blink yellow once continuously
Blink red once continuously
Blink red four times
continuously
USB-C Connector on the
Intelligent Power Supply
Description
The power supply is ready to connect to a
battery
Charging
Fully charged
Warning for the battery/charging channel
Battery/charging channel error
DC module is not activated
Warning for the DC module
DC module error
Generator (excl. DC Module)/AC module is not
activated
Warning for the generator (excl. DC Module)/
AC module
Generator (excl. DC Module)/AC module error
Generator (excl. DC Module) maintenance is
required
USB-C Cable USB-A Connector on the
Remote Controller