Cleaning And Maintenance; Precautions Before Cleaning; Routine Cleaning - klover PELLET FIRE PLACE 18 Manual De Instrucciones

CLEANING AND MAINTENANCE

Precautions before cleaning

Before carrying out any cleaning or maintenance, make sure that:

The insert has cooled down completely;

The ash is completely cold;

Before re-starting the insert, re-install all previously disassembled components.
For cleaning operations, personal protective equipment should be worn.i.e. gloves, goggles and dust masks, as directed in eu 89/391/EEC.

Routine cleaning

The insert requires periodical cleaning at least every 20 days of functioning or after 3-4 ignitions (according to the quality of the pellets used), to always
guarantee efficiency and optimal functioning.
Proceed as follows:
ATTENTION: use suitable "bin" type suction devices, with fine mesh filter, in order to prevent part of the ash being spilled back out into the environment,
damage the suction device itself.
Carefully clean the brazier from combustion residues, by removing it from its seat.
Use a suction device to remove the ash that is deposited under the brazier.
Empty the ash drawer.
16