Publicidad
Idiomas disponibles
Idiomas disponibles
Sicherheit information
1. To reduce the risk of an electrical blow, electricity on the
protec�ve switch or the safety box went out before star�ng.
2. All wiring must correspond to the NASI/NFPA 70-1999
Na�onal Electric Code and local electrical regula�ons. The
electrical installa�on must be carried out by a qualified and
approved electrician.
3. The connec�on box and support construc�on must be
assembled safely and 35 pounds (15.9 kilos) must be able
to transport reliably. Use only output boxes listed with
labeling
"Accepted for fans with a weight of £ 35 (15.9 kilos) or less."
4. The fan must be installed with a minimum distance of 2.1 m
(7 feet) from the posterior edge of the blades to the floor.
Make sure that there is a space of at least 30 cm between the
fan's blades and any wall or other obstacle with which they
could collide.It is important to note that the greater the
distance,the more efficient the airflow would be.
0,3m
5. Do not operate the reverse switch if the fan blades are
moving. You have to turn off the fan and stop the blades
before reverse the direc�on of the blades.
6. Do not place objects on the road to blades.
7. To avoid lesions or damage to the fan and other objects, be
careful if you work on the fan or clean it.
8. Electrical diagrams only serve as a reference. The ligh�ng
rates that are not delivered with the fan must be listed and
marked with the valve model that will be installed for use.
The switches must be general use switches UL. Take into
account the instruc�ons for the appropriate installa�on
included in the ligh�ng rates and the switches.
9. A�er the electrical connec�ons have been made, the size
staircase must be turned up and carefully push to the plug
box. The cables must be distributed in such a way that the
ground connected driver and the device head are next to
the socket.
All fixing screws must be verified before installa�on and, if
necessary, followed.
TECHNICAL INFORMATION
SKU
F6366CH110V
Nominal voltage
Nominal output (motor)
110-120V AC
30W
Installation & Operating Instructions for the
Parrot uncle Owner's Installation ,Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
WARNING: To reduce the risk of injury, blade brackets
cannot be folded during installa�on or a�er installa�on.
Do not put any object on the path of blades.
WARNING: Remove rubber motor a�acks at the
bo�om of the fan before moun�ng the blades or try
the motor.
WARNING: To avoid the risk of a fire or an
electrical blow, this fan should not be used with a
semiconductor speed controller.
WARNING: To avoid a possible electric shock,
turn off the current in the main security box
before wiring. If you feel that you do not have
enough knowledge or experience in electrical
wiring, communicate with a license electrician.
WARNING: Electrical diagrams only serve as a
reference. The op�onal use of an ligh�ng rate must
be on the list and marked with this fan for use.
WARNING: To reduce the risk of fires, electrical
discharges or injuries, assemble the device in a
socket that with the inscrip�on accepted for fans
with a weight of £ 35) or less. It is marked and use
the screws supplied with the plug.
light
24W 3000/4000/5000K
F6366CH110V
Publicidad
