Publicidad
Idiomas disponibles
Idiomas disponibles
9. Install blower.
Re-install blower. Secure blower with (2) screws from parts bag and
plug blower into black receptacle.
10. Finish ceiling, then install grille.
Attach MOUNTING PLATE to housing with (2) SCREWS, using the
GRILLE BACKETS installed in step 4.
Connect LIGHT PANEL PLUG to receptacle in corner of housing.
Place LIGHT PANEL SLOT over HOOK on MOUNTING PLATE.
Swing opposite side of LIGHT PANEL up to MOUNTING PLATE and
secure with ATTACHMENT SCREW.
Line up GRILLE FRAME with (3) LIGHT PANEL OPENINGS and
rotate GRILLE FRAME clockwise to secure it to LIGHT PANEL.
HOOK
LIGHT PANEL
PLUG
SLOT
LIGHT
PANEL
OPENING (3)
GRILLE
FRAME
RETROFIT
5. Remove old fan.
Enlarge ceiling opening (if necessary)
to 9¾" (parallel to joist) by 10½"
(perpendicular to joist). Leave ductwork
and wiring in place.
9¾-in.
6. Fold mounting ears flat
MOUNTING
PLATE
MOUNTING
PLATE
ATTACHMENT
SCREW (2)
LIGHT
PANEL
ATTACHMENT
SCREW
1
10½-in.
against housing.
JOIST
2
5
Publicidad
