Descargar Imprimir esta página

physa PHY PSC 01 Manual De Instrucciones página 9

Sillón de pedicura

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 34
2. Usage safety
ATTENTION!
Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury or even death.
The terms "device" or "product" are used in the warnings and instructions to refer to:
SPA pedicure chair
2.1.
Electrical safety
a)
The plug must fit the socket. Do not modify the plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b)
Avoid touching earthed elements such as pipes, heaters, boilers and refrigerators. There is an
increased risk of electric shock if the earthed device is exposed to rain, comes into direct contact with
a wet surface or is operating in a damp environment. Water getting into the device increases the risk
of damage to the device and of electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Use the cable only for its designated use. Never use it to carry the device or to pull the plug out of a
socket. Keep the cable away from heat sources, oil, sharp edges or moving parts. Damaged or tangled
cables increase the risk of electric shock.
e)
If using the device in a damp environment cannot be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of electric shock.
f)
Do not use the device if the power cord is damaged or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or the manufacturer's service centre.
g)
To avoid electric shock, do not immerse the cord, plug or device in water or other liquids. Do not use
the device on wet surfaces.
h)
ATTENTION! DANGER TO LIFE! While cleaning, never immerse the device in water or other liquids.
i)
Before the first use, please check whether the main voltage type and current comply with the
indicated data on the type plate.
j)
The electrical socket to which the device will be connected must have a grounding wire.
2.2.
Safety in the workplace
a)
If you are unsure about whether the product is operating correctly or if you find damage, please
contact the manufacturer's service centre.
b)
Only the manufacturer's service centre may make repairs to the product. Do not attempt to make
repairs yourself!
c)
In case of fire, use a powder or carbon dioxide (CO2) fire extinguisher (one intended for use on live
electrical devices) to put it out.
d)
Please keep this manual available for future reference. If this device is passed on to a third party, the
manual must be passed on with it.
e)
Keep packaging elements and small assembly parts in a place not available to children.
Remember! When using the device, protect children and other bystanders.
2.3.
Personal safety
a)
If you are unsure about whether the product is operating correctly or if you find damage, please
contact the manufacturer's service centre.
b)
Only the manufacturer's service centre may make repairs to the product. Do not attempt to make
repairs yourself!
c)
In case of fire, use a powder or carbon dioxide (CO2) fire extinguisher (one intended for use on live
electrical devices) to put it out.
d)
Please keep this manual available for future reference. If this device is passed on to a third party, the
manual must be passed on with it.
e)
Keep packaging elements and small assembly parts in a place not available to children.
EN

Publicidad

loading