Descargar Imprimir esta página

Be Cool BC2TAC2401 Instrucciones De Uso página 180

Torre de refrigeración digital

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 66
Clean the tank inside and out with a soft cloth previously dipped in soapy
water.
Then rinse the tank with warm and clean water.
Let the tank dry completely and put the water pump back in the plastic
holder before inserting and filling the water tank.
Activities at the end of the season
Switch off the unit and disconnect the mains plug.
Empty and carefully clean the water tank.
Clean the cover grilles and replace them after they have dried (see section
"Cleaning the cover grilles").
Pack the unit and store it in a cool, dry place
Activities at the beginning of the season
Make sure that the mains cable is in order and that the earthing works.
Follow the installation and safety instructions carefully.
Causes of errors and troubleshooting:
Before contacting our customer hotline/service centre, please check whether the
error can be remedied using the following instructions
PROBLEM
The air cooler
cannot be switched
on.
The air cooler only
works for a short
time.
An unpleasant
odour spreads
through the room
during operation.
POSSIBLE CAUSE
Power failure
The unit is not
connected to the power
supply.
The water tank is empty.
Something is blocking
the air outlet.
The air filter or the water
tank is dirty.
180
SOLUTION
Wait until the power supply is
restored.
Connect the unit to the power
supply and wait at least 30
minutes!
Fill the water tank.
Check and remove any
obstructions blocking the air
supply.
Clean the air filter(s) according
to the description.

Publicidad

loading