SHERCO 125 ST-R RACING Manual De Instrucciones página 77

MAINTENANCE PROCESSES
Checking and adding clutch fluid
A
Checking and adding rear brake fluid
The clutch fluid tank is above the handle.
To properly inspect, place the motorcycle in vertical
position.
To add:
- Remove the two
- Remove the inner seal.
- Fill with fluid.
Clutch fluid type: Mineral.
The clutch fluid level should be between 3 and 4 mm
from the upper lip.
The brake fluid reservoir is located directly on the
A
master cylinder.
WARNING
To properly inspect, place the motorcycle in vertical position.
To add:
- Remove the master cylinder cap.
- Remove the inner seal and the pressure ring.
- Fill with fluid.
Brake fluid type: DOT 4.
WARNING
The brake fluid level should be between the marks MINI and
MAXI A .
screws from the tank cover.
A
77