TREVIDEA Girmi TR20 Manual Del Usuario página 12

stops before removing the food from the glass container.
When finished using the unit, it is advisable to wrap the
power cord so as to ensure a better cleaning, avoiding any
risk of damage.
When mincing fruits, remove the pit and/or any tough
rind.
For cleaning, we recommend using warm water only,
limiting the use of detergents. In this case, rinse the part
profusely. Do not immerse the motor unit in water or
other liquids; clean it with a damp cloth.
Caution: blades are very sharp; pay attention not to
cut yourself while removing the attachment or during
cleaning operations.
DESCRIPTION TR20
1) Motor Block
3) Blade group
OPERATION
(Fig. B - C - D)
• Fasten the work bowl (2) to the motor block (1) (fig. B).
• Secure the blade group (3) to the rotating pin (1a), making sure it clips into place (fig. B).
Blades (3) are sharp, handle them with the utmost care. Put the food in the work bowl (2) (making sure to
comply with the quantities reported in the "quantities and timeframes" table).
Pour thinly sliced pieces of food in the work bowl (2).
• Place the lid (4) over the motor block (1) (fig. C).
• Connect the plug to the power socket.
• Turn appliance ON by exerting a slight pressure on the lid (4) with the palm of your hand (fig. C).
If the appliance fails to start once this operation is concluded, ascertain that possible pieces of food are not
stuck between the lid (4) and the edge of the work bowl (2), thus preventing lid (4) from sliding in.
2) Work bowl
4) Lid 6) ON/OFF switch
11