Publicidad
Idiomas disponibles
Idiomas disponibles
LIRA SLIM PLUS
Only use original parts recommended by the manufacturer.
Any accumulation of unburned pellets in the brazier following a failed lighting or
emptying of the pellet hopper must be removed before restarting the unit; always
check the cleanness of the brazier and correct position before each restart.
It is forbidden to manually load the fuel into the brazier. Failure to comply can
generate dangerous conditions
Disconnect the unit from the power supply before carrying out any maintenance
operation. Removal of the plug must be clearly visible for the operator to verify
safe operation.
The generator is designed to operate in any climatic condition; in case of
particularly adverse conditions (strong wind, frost) the safety systems could
intervene and shut down the unit. If this occurs, contact the technical support
service.
Never disable the safety systems.
In case of fire in the flue use suitable systems to smother the flames, or call the
fire department.
In the first hours of operation, fumes and odors may be generated due to the
normal heating process of the appliance without causing any problems. During
this process, which lasts for a short time and is limited to the first heating-
cooling cycles, it is recommended to ventilate the installation room well with the
appliance operating at maximum power for a short period of time.
Since the unit can turn on independently with the chronothermostat, or remotely
via the dedicated applications, it is strictly forbidden to leave any combustible
object within the safety distances indicated on the dataplate and in this manual.
Residual risks
The unit is designed in such a way as to guarantee the essential safety requirements for the user.
Safety, as far as possible, has been integrated into the design and construction of the unit.
A description of the risk and the relevant area or part is provided for each residual risk.
EN
A73023890 - Rev 03 - 02/2024
134
Publicidad
