Publicidad
Idiomas disponibles
Idiomas disponibles
10. Ensure that there is no liquid or moisture in the outlet
where the product plug is installed.
11. The rear surface of the oven also heats up when the oven
is running. The electrical connections must not touch the
rear surface, otherwise the connections may be damaged.
12. Do not tighten the connection cables to the oven door
and do not place them on hot surfaces.
13. If the cable melts, it can cause a short circuit in the oven
and even a fire.
14. Disconnect the unit from the plug during installation,
maintenance, cleaning and repair.
15. If the power cord is damaged, it must be replaced by the
manufacturer or its service agent or similarly qualified
person in order to avoid a dangerous situation.
16. Ensure that the plug is firmly inserted into the wall outlet
to prevent sparks.
17. Do not use steam cleaners to clean the appliance,
otherwise an electric shock may occur.
18. A unipolar switch capable of disconnecting the power
supply is required for installation. The disconnection of
the power supply must be provided with an integrated
switch or fuse installed in the fixed power supply in
accordance with the building code.
14
AF BECKEN manual Forno multifuncoes BBIO5046 A5 (3).indd 14
AF BECKEN manual Forno multifuncoes BBIO5046 A5 (3).indd 14
06/05/2020 14:21
06/05/2020 14:21
Publicidad
