Publicidad
Idiomas disponibles
Idiomas disponibles
BATTERY CHARGING/REPLACEMENT
When the symbol "
high enough and replacement of the battery is needed. The steps are
as follows:
1.
Use a Phillips screwdriver to remove the screw that secures the
battery compartment.
2.
Remove the battery cover in the direction indicated by the arrow on
the battery cover.
3.
Replace the old battery with a new one of the same type, make sure
that the polarity connections are correct.
4.
Reinstall the battery cover and secure the screw.
Phillips head
screw
Battery cover
" is shown on the display, the battery is not
Figure 4
- 12
-
9V battery
Publicidad
