Publicidad
Idiomas disponibles
Idiomas disponibles
To remove:
2. Squeeze both sides of the chip collector adaptor while sliding
away from the base plate and then pulling down (Fig.Q2).
MAINTENANCE
Your power tool has been designed to operate over a long
period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
WARNING: To reduce the risk of serious personal injury,
turn tool off and disconnect battery pack before making
any adjustments or removing/installing attachments or
accessories. An accidental start-up can cause injury.
The charger and battery pack are not serviceable.
Lubrication
Your power tool requires no additional lubrication.
Cleaning (Fig. M)
WARNING: Electrical shock and mechanical hazard.
Disconnect the electrical appliance from the power source
before cleaning.
WARNING: To ensure safe and efficient operation, always
keep the electrical appliance and the ventilation slots clean.
WARNING: Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool. These chemicals may
weaken the materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
For better plunge sliding movement, frequently clean the
plunge rods
of dust or debris with a DRY cloth only. If the
36
plunging movement is not moving as smoothly as desired,
lubricate the plunge rods with a dry Teflon™ lubricant.
Ventilation slots can be cleaned using a dry, soft non-metallic
brush and/or a suitable vacuum cleaner. Do not use water or
any cleaning solutions. Wear approved eye protection and an
approved dust mask.
Optional Accessories
WARNING: Since accessories, other than those offered by
D
WALT, have not been tested with this product, use of such
e
accessories with this tool could be hazardous. To reduce the risk
of injury, only D
WALT-recommended accessories should be used
e
with this product.
Consult your dealer for further information on the
appropriate accessories.
Base Mounting Points for Accessories (Fig. L)
This router has three threaded holes
allow it to attach to other accessories.
Protecting the Environment
Separate collection. Products and batteries marked
w
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can
be recovered or recycled, reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at
www.2helpU.com.
38
built into the base that
Rechargeable Battery Pack
This long-life battery pack must be recharged when it fails to
produce sufficient power on jobs that were easily done before.
At the end of its technical life, discard it with due care for
our environment:
• Run the battery pack down completely, then remove it from
the tool.
• Li-Ion cells are recyclable. Take them to your dealer or a local
recycling station. The collected battery packs will be recycled or
disposed of properly.
EnGLIsH
37
Publicidad
