AERMEC MODUCONTROL Manual De Uso página 37

10 ADVANCED READINGS MENU
To enter the ADVANCED READINGS menu, press the key shown in (Fig.7). Once the key has been pressed the password must be inserted for access to the various menus. To
access the user menu the password is 010. To modify the value of the password use the arrow keys. Once the correct password has been inserted, press the key shown in (Fig.7).
The display shows the index of the reading and a string of three characters that identify it. The string remains displayed for one second, after which it is replaced by the value
relative to the reading itself. To pass to the next reading, use the arrow keys (Fig.8).

PASSWORD = 010
Fig. 7
Fig. 8
Index - String Meaning of the reading
0 Cor
Inverter outlet voltage
1 Uo
2 Uob
Inverter dissipater temperature
3 HSt
Value of the dynamic Force-Off
4 dFo
DHW remote probe value
5 dHt
Compressor intake probe value
6 ASP
Inverter Current
BUS voltage
Current (in Amperes) measured by the inverter module;
Parameter displayed with ANLI only;
Output voltage (in Volt) measured by the inverter module;
Parameter displayed with ANLI only;
BUS voltage (in Volt) measured by the inverter module;
Parameter displayed with ANLI only;
Temperature (in C°) of the inverter module heat dissipater;
Parameter displayed with ANL inverter only;
Current dynamic Force-Off value calculated on the basis of the outdoor air temperature
Value read by the remote probe positioned in the plant water storage tank; function enabled by the
parameter (0) in the installer menu
Temperature read from the robe positioned on compressor intake;
Parameter displayed with ANLI only.
Note
37