Bresser ClimaTrend Hygro Quadro Manual De Instrucciones página 23

(A1) appears.
2. If the reception is successful, the display
will show temperature and humidity of the
respective outdoor sensor, the temperature
trend symbol (A3) and the symbol of the
comfort level (A4).
3. Then the radio-controlled reception symbol
disappears.
4. In the display section 4, the measured values
of the internal sensor (Indoor) will appear.
5. If the values are not received from a chan-
nel, '--' appears on the display, check the
batteries and try it again. Check if there is
any source of interference.
6. You can start the initialization manually.
7. Button function:
(1) CHANNEL / + button
A. Press it to select different display sections.
B. In setting mode, press it equals to UP.
Manual_7000020000000_ClimaTrend-Hygro-Quadro_en-de-fr-es-it_BRESSER_v042024a.indb 23 Manual_7000020000000_ClimaTrend-Hygro-Quadro_en-de-fr-es-it_BRESSER_v042024a.indb 23
C. Press and hold to enforce radio controlled
reception.
(1) Press the CHANNEL/+ button until the
arrow (A7) appears on the desired chan-
nel. Channel 1, 2 or 3, or IN for enforce a
radio controlled reception for all outdoor
sensors simultaneously.
(2) Press and hold this button for 3 seconds
to search for signals from the desired
outdoor sensor.
(3) The radio-controlled reception symbol
(A1) appears.
(4) The base station will scan the measurements.
(5) If the reception is successful, the display
will show temperature and humidity of the
desired outdoor sensor, the temperature
trend symbol (A3) and the symbol of the
comfort level (A4).
(6) Then the radio-controlled reception symbol
disappears.
GB
23
12.04.2024 08:47:29 12.04.2024 08:47:29