Descargar Imprimir esta página

ANSMANN Care BABYPHONE ROM Instrucciones De Uso página 7

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

CLEANING ANd CARE
Before cleaning, disconnect mains-operated devices from the power supply (pull out the plug). clean the
surface of the housing with a little soap solution on a soft cloth. do not use scouring agents or chemicals.
the units should be placed on a neutral underlay to avoid marks on furniture from the rubber feet. We
cannot accept any liability in this area.
SAFETy INSTRUCTIONS
if any damage occurs to housings, plugs, mains cables or insulation, stop using the appliance immediately
and disconnect it from the mains.
MORTAL dANGER– OF AN ELECTRIC SHOCk
(pull the mains plug out of the socket). do not attempt to undertake repairs yourself.
18. TECHNICAL dATA
Frequencieschannel 1 = 40.670 MHz
channel 2 = 40.690 MHz
codes dags: three codes (a + B+ c)
Mains operationMains adapter 230 V ~, 50/60 Hz, approx. 3 Wsec.: transmitter 9 V / 100 ma, receiver
6V / 200 ma
Battery (transmitter)9 volt alkaline block
Battery (receiver)2 x 1.5 V Mignon alkaline (aa)
or rechargeable nicd/niMH batteries
charge timeapprox. 10-15 hrs.
Operating time approx. 20-50 hrs.
earphones 3.5 mm socket/mono > 8 ohms
dimensions (WxHxd)10 x 4 x 11 cm (charger)
dimensions (WxHxd)6.5 x 10.5 x 4 cm (transmitter/receiver)
Weight 100 g (without batteries/ rechargeable batteries)
We reserve the right to make modifications without prior announcement.
as a consequence of our continuous product development and appliance optimisation, the contents may
vary from the details on the packaging.
WARRANTy
We hereby issue a warranty for a period of 3 years subject to the terms and conditions listed below. in the
event of warranty claim please return it to the original dealer where you bought the Babyphone (in original
packaging) with your proof of purchase.
PLEASE NOTE!
no warranty claim will be accepted for the following cases:
• Operating error
• empty batteries or defective rechargeable batteries
• Wrong coding / channel selection

Publicidad

loading