MIG 300 M Manual De Instrucciones página 18

CO104562 - Wire feeder motor 4 rolls 75W (MIG 500 / 650 M)
Item 1) - CC108309 – Pin for side head screw
Item 2) - CC106369 - Head screw for right drive gear
Item 3) - CC105889 - Head screw for central drive gear
Item 4) - CO109523 – Central wire guide for motor
Item 5) - CO107104 - Retaining screw
Item 6) - CO109161 - Wire inlet guide
Item "A" 7,8,9,10,11) - CO105021 - Euromig plug
Item "B") - CO105212 - Protection euromig plug
Item 12) –
CO105204 - Roll 1.6-2.4 mm fluxed
CO105545 - Roll 1.6-2.0 mm fluxed
CO105546 - Roll 2.4-2.8 mm fluxed
CO8YE3721012FD - Roll 1.0-1.2 mm fluxed
CO8YE3721216FD - Roll 1.2-1.6 mm fluxed
CO8YE3721624FD - Roll 1.6-2.4 mm fluxed
CO8YN3720608FD - Roll 0.6-0.8 mm
CO8YN3720810FD - Roll 0.8-1.0 mm
CO8YN3721012FD - Roll 1.0-1.2 mm
CO8YN3721216FD - Roll 1.2-1.6 mm
CO8YU3720608FD - Roll 0.6-0.8 mm aluminum
CO8YU3720810FD - Roll 0.8-1.0 mm aluminum
CO8YU3720812FD - Roll 0.8-1.2 mm aluminum
CO8YU3721012FD - Roll 1.0-1.2 mm aluminum
CO8YU3721216FD - Roll 1.2-1.6 mm aluminum
18
300M / 350M / 400M / 450M / 500M / 650M