Ac Volt Measurement - AEMC Instruments 514 Manual De Instrucciones

4.3

AC Volt Measurement

• Turn the rotary range switch to the
• Insert red test lead to the red "+" input jack and the
black lead to the black "COM" input jack.
• Choose AC by pressing the AC/DC button.
• Bring the test probe tips into contact with the test
points.
• If reading is unstable and hard to read, push the
HOLD button and read the measurement.
WARNING: Immediately unclamp the meter
from the conductor under test if overload "
is displayed.
14
range.
Clamp-on Meter Model 514
"