Descargar Imprimir esta página

Aqua Medic Ocean Clear Manual De Instrucciones página 8

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
Compact fleece roll filter with high cleaning performance
The fleece filter of the Ocean Clear is extremely effective at filtering out coarse dirt particles, suspended
particles and other organic waste from the water. This helps to minimize the formation of nitrate and
phosphate while retaining important trace elements.
Suitable for salt- and freshwater aquaria with a water volume of up to 850 litres.
For operation with an additional pump, we recommend our DC Runner 800 or 1000.
Only for operation inside the filter tank. Dimensions (l x w x h) app.: 180 x 160 x 325 mm
1.
Included in delivery
-
Ocean Clear housing with filter insert
-
Ocean Clear Fleece Roll (approx. 40 m)
-
Controller
-
Power supply unit: In: 100 - 240 V AC / 50/60 Hz
Out: 12 V/ 1 A DC
-
Float switch
-
Motor
2.
Safety instructions
-
When working in the aquarium, always disconnect all units from the power supply system before putting your
hands into the water. Connect all units to the mains via a residual current device with a maximum residual
current of 30 mA.
-
Connection to pumps other than those mentioned in the instructions is not permitted.
-
Suitable for indoor use only.
-
Protect the controller from moisture (humidity < 80%), splash water and condensation.
-
We recommend forming drip loops with the cables to prevent any water running along the cables from getting
into sockets.
-
The electrical data of the Ocean Clear must match the data of the power supply unit used (12 V DC). This
data can be found on the rating plates.
-
Not suitable as a toy for children.
3.
Start-up
3.1. Assembly
Fig. 1: Ocean Clear housing and filter insert
Operation Manual ENG
8

Publicidad

loading

Este manual también es adecuado para:

408.010