Preparing The Ice Maker For Long Storage - Orien FS-65IM Manual Del Usuario

o Waterrunningfrom thewatersumpto the evaporator p latemaymakea splashing
sound.
o Waterrunningfrom the evaporator t o thewatersumpmaymakea splashingsound.
o As eachcycle ends, y ou mayheara gurgling sounddueto the refrigerantflowing in
your ice maker.
o You mayhearair being forcedoverthe condenser b y the condenser f an.
o During theharvestcycle,you mayhearthe soundof ice cubesfalling into the ice
storage bin.
o Whenyou first startthe icemaker,you mayhearwaterrunningcontinuously.Theice
makeris programmed to run a rinsecyclebeforeit beginsto makeice.
Preparing the Ice Maker for Long Storage
If the ice maker will not be used for a long time, or is to be moved to another place, it
will be necessary to drain the system of water.
1. Shut off the water supply at the main water source.
2. Disconnect the water supply line from the water inlet valve.
3. Disconnect the drain pipe to the drain line or floor drain.
4. Allow the ice maker to run for an hour or more until all remaining ice cubes have
been ejected from the ice maker assembly.
5. Shut off the electric supply at main electrical power source.
6. Screw off the nut of the water drain hole at the back of the machine, drain out water
residue completely (do not loosen or screw off the nut at other times), then tighten the
nut after finishing.
7. Drop the door open to allow for circulation and prevent mold and mildew.
8. Leave water supply line and power cord disconnected until ready to reuse.
17