Features - Craftsman 125.46569 Manual Del Usuario

PRODUCT SPECIFICATIONS
Circular Saw
Model No. .................................................................................................................125.46569
Type...................................................................................................Cordless, battery-powered
Motor.................................................................................................................... 20 V max* d.c.
Blade Diameter...............................................................................................................6-1/2 in.
Blade Arbor........................................................................................................................5/8 in.
Maximum Cutting Depth at 0°.............................................................................................. 2 in.
Maximum Cutting Depth at 45°......................................................................................1-1/3 in.
No Load Speed............................................................................................................3300 rpm
Weight (with included battery)...........................................................................................6.8 lbs
KNOW YOUR CIRCULAR SAW
See Figure 1, page i
The safe use of this product requires an
understanding of the information on the
product labeling and in this Operator's Manual
as well as a knowledge of the project you
are attempting. Before use of this product,
familiarize yourself with all operating features
and safety rules.
BEVEL ADJUSTMENT
The bevel adjustment allows you to set the
circular saw for bevel cuts from 0° to 45°.
BLADE WRENCH STORAGE
Convenient wrench storage for quick blade
changes.
DEPTH ADJUSTMENT KNOB
The depth adjustment knob adjusts the depth
of cut from 0 in. to 2 in.
SAFETY SWITCH
The safety switch reduces the possibility of
accidental starting.

FEATURES

SPINDLE LOCK BUTTON
The spindle lock button allows you to secure
the blade when turning the blade screw.
WIDTH OF CUT GUIDE
When making straight cross cuts or rip cuts,
the guide can be used to measure up to 4 in.
on the right side of the blade, and up to 1 in.
on the left side of the blade.
TRIGGER SWITCH
Depress the safety switch, and then squeeze
the trigger switch to start the saw. To stop it,
release the trigger switch.
LOWER BLADE GUARD
The lower blade guard attached to the circular
saw is covering the blade for your protection
and safety.
9 ― English