Arbortech AS170 Manual De Instrucciones página 16

E
ITEM SYMPTOM
N
14 Blades "blueing".
G
15 Blade mounting bolts not
tightening fully.
16 Threads on tool stripped
17 Tool will not run.
ENGLISH 13
CHECK/REMEDY
• Worn teeth - replace blades.
• Excessive force being used.
• Insufficient "sawing" motion by the operator.
• Material too hard.
Blades rubbing together with excessive force (see section 8).
• Threads on bolts stripped - replace bolts not tightening.
• Contact your ARBORTECH authorized service center.
• The AS170 is fitted with Auto cut off brushes.
• Check brushes are not damaged or excessively worn - replace Contact
your ARBORTECH authorized service centre.