Artromot®-K1 Description; Description Of The Device Components - DJO Global ARTROMOT-K1 Modo De Empleo

2. ARTROMOT®-K1 description
The motorized CPM device permits exten-
sion and flexion of the knee joint in the
range of -10°/0°/120°, and of the hip joint in
the range of 0°/7°/115°.
These are some of the outstanding
ARTROMOT®-K1 features:
− anatomically correct setup
− physiological movements
− programming unit for precise adjust-
ment of patient-specific therapy
parameters
− symbols for easy operation of the pro-
gramming unit
− programmed therapy parameters saved
to chip card
Biocompatibility
The parts of the ARTROMOT®-K1 device
that come in contact with the patient dur-
ing the intended use, are designed to fulfill
the biocompatibility requirements of the
applicable standards.
2.1 Description of the
device components
Note: Please fold out page III!
1. Thigh support assembly
2. Clamping lever to adjust the height of
the thigh support assembly
3. Thigh length scale
(femur length scale)
4. Thigh length fixation screws
(femur length)
5. Knee hinge
6. Calf support assembly
7. Clamping lever to adjust the height of
the calf support assembly
8. Calf length fixation screws
(tibia length)
9. Calf length scale (tibia length scale)
10. Strap to secure the foot to the footplate
ORMBS-12006_Artromot_K1_Comfort_2012_rz.indb 38
11. Footplate
12. Footplate angle fixation screw
13. Clamping lever to adjust footplate
rotation and level and to remove the
footplate
14. Connection for ARTROSTIM®-
FOCUS®plus control cable²
15. Connection for programming unit
16. Connection for power cord
17. Fuse cap
18. Power switch (ON/OFF)
19. Nameplate
20. Programming unit
21. Patient chip card¹
22. Compartment for storage of
programming unit
¹ ARTROMOT®-K1 devices with patient
chip card only.
² ARTROMOT®-K1 Comfort devices only.
38
18.05.12 17:27