Care And Cleaning; Oven Ceiling - Zanussi ZOB361 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 51

Care and cleaning

Warning! Before you clean the appliance, switch it
off. Make sure that the appliance is cold.
Warning! Do not clean the appliance with steam
cleaners or high-pressure cleaners.
Caution! Do not use corrosive or scouring cleaning
agents, sharp objects, stain removers or abrasive
sponges.
Warning! Do not clean the glass door with abrasive
cleaning agents or metal scraper. Heat resistant
surface of the inner glass can damage.
Caution! If you use an oven spray, follow the
instructions from the manufacturer.
• Clean the front of the appliance with a soft cloth with
warm water and cleaning agent.
• To clean metal surfaces use a usual cleaning agent
• Clean the oven interior after each use. Thus you can
remove dirt more easily and it does not burn on.
• Clean stubborn dirt with a special oven cleaner.
• Clean all oven accessories (with a soft cloth with warm
water and cleaning agent) after each use and let them
dry.
• If you have nonstick accessories, do not clean them
using an aggressive agents, sharp edged objects or
dishwasher. It can destroy nonstick coating!
Shelf Support Rails
Removing the shelf support rails
1
Pull the front of the
shelf support rail away
from the side wall.
Installing the shelf support rails
Install the shelf support rails in opposite sequence.
2
1
2
Pull the rear shelf sup-
port rail away from the side
wall and remove it.
The rounded ends of the shelf support rails must
point to the front!

Oven ceiling

You can remove the heating element on the oven ceiling
to clean the oven ceiling easily.
Warning! Before you remove the heating element
switch off the appliance. Make sure that the
appliance is cold. There is a risk of burns!
1
Unscrew the screw
which holds the heating
element. For the first time,
use a screwdriver.
Clean the oven ceiling with a soft cloth with warm water
and cleaning agent and let it dry.
Installing the heating element
1. Install the heating element in opposite sequence.
Warning! Make sure that the heating element is
correctly installed and it does not fall down.
Cleaning the oven door
Before you clean the oven door, remove it from the oven.
Warning! Make sure that the glass panels are cool,
before you clean the glass door. There is risk that
the glass breaks.
Warning! When the door glass panels are damaged
or have scratches, the glass becomes weak and can
break. To prevent this you must replace them. For more
instructions, speak with your local Service Centre.
2
Carefully pull the heat-
ing element downwards.
The oven ceiling is ready
to clean.
17

Publicidad

Tabla de contenido
loading

Tabla de contenido