Akiyama Ares SC4 Manual De Usuario página 38

User Manual Ares SC4. Control Panel.
ASIO driver Control Panel:
When you use the ASIO Driver supplied accordingly, open the ASIO-USB Control Panel in your computer. When you have
the driver installed an Icon will appear at the lower right of your PC.
Open it with mouse right button and you can view the ASIO-USB Control Panel.
It is very important that you understand well the Control Panel since it is where you change the settings of your sound
card ARES Sc4.
Headphones Output level:
1+2: sets the Headphones Output level of ARES SC4 Channels 1 and 2.
3+4: sets the Headphones Output level of ARES SC4 Channels 3 and 4
This is the internal HP level (Inside your Computer). You also have an analogue potentiometer to further
adjust the Headphones Output level (See page
digital to analogue.
Upon your DJ Software use mode you will have to adjust the HP Output accordingly.
NOTE: ALWAYS turn down the analogue Headphones level (See page
them. The Output level is high enough to damage your hearing.
NOTE: If you press "Gang" both sliders will move like one. If you press MUTE the IN/OUT is muted.
Monitor
30. ( 4)) when the audio signal is converted from
37
Monitor
30. ( 4)) before using