Akiyama Ares SC4 Manual De Usuario página 39

User Manual Ares SC4. Control Panel.
MIC level:
ARES SC4 has two electronic paths for Microphone, one analogue and one digital (converted into digital
signal and processed by your computer software).
Gain: sets the Microphone Input sensitivity prior to be digitalized into your computer. Similar to a
normal Gain on a mixer. For proper level setting, the precessing software on your computer shall have a
level meter so you can optimize your dynamic range as is usually done with the Gain of a Mixer channel.
Through: controls the analogue electric path of the Mic signal. We will take care of these issues later in
this manual. (See page 47).
NOTE: If you press MUTE the IN/OUT is muted.
Input level:
ARES SC4 has two Input level controls; one for channels 1+2 and one for channels 3+4. Similar to a
normal Gain on a mixer. For proper level setting, the processing software on your computer shall have a
level meter so you can optimize your dynamic range as is usually done with the Gain of a Mixer channel.
NOTE: If you press "Gang" both sliders will move like one. If you press MUTE the IN/OUT is muted.
Output level:
ARES SC4 has two Output level controls; one for channels 1+2 and one for channels 3+4. For proper
level setting, the precessing software on your computer shall have an Output level meter so you can
optimize your dynamic range as is usually done with the main Output of a Mixer.
NOTE: If you press "Gang" both sliders will move like one. If you press MUTE the IN/OUT is muted.
38