Craftsman 151.74935 Manual Del Usuario página 10

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING!
Avoid serious injury: The
blades coast after turning off. ALWAYS keep
both hands on the hedge trimmer handles
until the blades have completely stopped to
prevent your hands from touching the moving
blades.
■ Make sure the hedge trimmer switch is
off when clearing jammed material from
blades. To avoid possible accidental start-
ups, remove or disconnect the battery before
servicing, cleaning, or removing material from
the hedge trimmer.
■ DO NOT operate the hedge trimmer when
you are tired or your visibility is limited. Do
not use the trimmer at night or in reduced
light.
■ Keep the handles dry, clean, and free from
oil and grease.
■ DO NOT use the hedge trimmer if the
handle guard is damaged.
ASSEMBLY
SET UP
See Figure 2, page ii
■ Carefully remove the blade scabbard from
the cutting blades.
REMOVE / ATTACH THE BATTERY
See Figures 3-4, page ii
Removal
■ Press the release button on the battery
pack and remove battery from product.
(Fig. 3)
Attachment
■ Align the battery pack to the slots at the
bottom side of the rear safety guard and slide
it in until it locks in place. (Fig. 4)
NOTE: Always place blade scabbard over
blade when hedge trimmer is not in use
or user is performing any cleaning of the
trimmer handles or motor housing.
10 ― English

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

151.74937

Tabla de contenido