Battery Installation - VITROTECLABS BP09 Manual De Usuario

Battery Installation

When the batteries get weak, the battery warning symbol appears
is still possible to measure temperature. The batteries must be
replaced. When the battery symbol
flashes and "Lo" appears in the display, the batteries must be
replaced. If the batteries are too flat, then the thermometer will switch
off automatically.
NOTE:
• When changing the batteries, use batteries of the same type, make
and capacity.
• Always replace all batteries at the same time.
• Do not use rechargeable batteries.
• Use batteries free from heavy metals.
1. Open the battery case by sliding off the cover on the back of the unit.
2. Remove used battery.
3. Replace with a lithium 3V CR2032 battery in designated area. The
larger part of the battery should be facing up. You should still be
able to see the "+" sign when battery is installed.
4. Slide the cover back on. Unit is ready for immediate use
Dispose of used batteries in accordance with the applicable legal
regulations. Never dispose of batteries in the normal household waste.
10
. It