Refrigerator Operating; Setting The Temperature - Electrolux DF36A Manual De Instrucciones

Air Flow Control
Your refrigerator is frost free (automatic defrost),
which prevents ice formation. The air flow control
into the freezer or the refrigerator is made by the
button shown in the figure below.
The air circulation control changes the temperature
of the freezer and refrigerator compartments, as
shown below:
Air flow control
Use options
Quicker freezing of foods in
freezer compartment
Quicker cooler of foods in
refrigerator compartment
In the daily use of the refrigerator it is
recommended that the air flow control be
used in "NORMAL " position.

Setting the temperature

The thermostat position (temperature selector)
and its regulation are specific to these models and
should not be compared to graduation of refrigera-
tors controls from other brands or models.
When adjusting the refrigerator temperature, you
should consider the following factors:
1. The amount of food to be stored.
2. The ambient temperature in which the refrigerator
is installed.
3. Do not exceed the limits of setting temperature

Refrigerator operating

characteristics
Control
adjustments
COLD DAYS
HOT DAYS
selector (Maximum Cold and Minimum cold). Note
the alignment of the button mark with the Dial.
If it's necessary to adjust the refrigerator temperature,
make small changes in graduation.
Avoid using the maximum graduation because at this
point, on cold days, may result in the freezing of foods
in the refrigerator and excessive energy consumption.
The internal temperature of the refrigerator depends
on the ambient temperature, the number of times the
doors are opened and replacement foods on its inside.
WARNING
If the TURBO function
"TEMPERATURE SET" can not be changed.
Control Panel
TEMP . BUTTON:
Through this button you can select
the TEMPERATURE ADJUSTMENT
the freezer compartment and also the
TURBO function.
is selected the
29