Stem Deflector - avdel Genesis G2LB Manual De Instrucciones

A c c e s s o r i e s
S t e m D e f l e c t o r
The stem deflector is a very simple alternative to the standard
stem collector and allows access in restricted areas. It is easy
to fit to the tool as follows:
•
Unscrew Retaining Nut 26 by inserting a 3 millimetre
diameter rod into one of the holes.
•
Remove Retaining Nut 26 and the stem collector
assembly, items 18, 20, 21, 22, 23, 24, and 25.
•
Push the boss end of the stem deflector into the internal
groove of the adaptor nut.
•
Rotate the stem deflector until the aperture faces away
from the operator and other person(s) in the vicinity.
E x t e n s i o n
Fitted between the tool and the nose assembly the extension allows
access into deep channels.
•
To fit the extension, remove any nose assembly components.
•
Screw the inner extension to Chuck Collet Adaptor 1.
•
Screw the outer onto Head Assembly 4.
•
Fit the nose assembly onto the extension.
Item numbers in bold refer to the General Assembly drawing and Parts List on pages 16 and 17.

STEM DEFLECTOR

07340-00342
ADAPTOR NUT
71210-20101
KIT PART NUMBER: 71210-20100
INNER
EXTENSION PART NUMBER: 71210-20300
OUTER
11