Assembly - Craftsman 151.74936 Manual Del Usuario

UNPACKING
This product requires assembly.
■ Carefully remove the product and any
accessories from the box. Make sure that all
items listed in the packing list are included.
Do not use this product
WARNING!
if any parts on the Packing List are already
assembled to your product when you unpack
it. Parts on this list are not assembled to the
product by the manufacturer and require
customer installation. Use of a product that
may have been improperly assembled could
result in serious personal injury.
■ Inspect the product carefully to make sure
no breakage or damage occurred during
shipping.
■ Do not discard the packing material until
you have carefully inspected and satisfactorily
operated the product.
■ If any parts are damaged or missing, do not
operate the product. Return it for replacement
to the retailer from which it was purchased.
151.74936 (KIT) PACKING LIST
24V Cordless Sweeper
Sweeper Tube
(1) 24V Max* 2.5 Ah Lithium-Ion Battery
(1) 24V Max* Battery Charger
Operator's Manual
151.74946 (TOOL ONLY) PACKING LIST
24V Cordless Sweeper
Sweeper Tube
Operator's Manual

ASSEMBLY

BATTERY
IMPORTANT! The battery pack is not
charged when it is purchased. Before using
the sweeper to read all safety precautions,
and follow the instructions in the Battery Pack
And Charger section. With regular use, it will
need shorter charging time. If storing for a
prolonged period of time, remove the battery.
When ready to use again, charge the battery
pack for at least 70min again.
TO REMOVE
See Figure 2, page ii
■ Press the release button on the battery
pack and remove it from the product.
■ Grasp the sweeper firmly, and pull the
battery pack out of the handle.
NOTE: The battery pack fits into the
bottom of handle snugly in order to prevent
accidental dislodging. It may require a strong
pull to remove it.
TO INSTALL
See Figure 2, page ii
■ Align the tongue of the battery pack with
the cavity in the sweeper housing.
■ Grasp the sweeper firmly.
■ Push the battery pack into the handle until
the latch locks into place.
■ Do not use force when inserting the battery
pack. It should slide into position and "click".
WARNING!
in order to avoid injury and to reduce the risk
of electric shock or fire:
■ Replace the battery pack or the charger
immediately if the battery case or charger
cord is damaged.
■ Verify that the switch is in the OFF position
before inserting or removing the battery pack.
9 ― English
Follow these instructions