Controls & Parts; Before The First Use; Use - Ambiano NDJ-202 Manual Del Usuario

Mini food chopper
1. Remove the product from the packaging and disassemble the components. To remove
the bowl from the base of the unit, turn the bowl counterclockwise.
NOTE: The bowl may be slightly difficult to remove when the product is new. To aid in the
removal of the bowl, place the base of the unit onto its side on a soft surface and then
firmly turn the bowl counterclockwise to remove.
2. Thoroughly wash the cover (lid), bowl, and blade assembly in warm, soapy water. Rinse
the parts and let them dry.
WARNING: Handle the blades with care as they are extremely sharp. Use caution when
attaching, detaching, cleaning or storing the blade assembly.
3. Place the base of the unit onto a level and stable surface.
4. Place the bowl over the shaft and turn the bowl clockwise until the safety latches of
the container bowl lock into the base of the unit. This prevents the bowl from detaching,
specifically during operation.
5. Attach the blade assembly by carefully holding onto the opposite end of the blades and
insert the blade assembly (blades first) securely over the center column of the bowl.
6. ALWAYS attach the cover (lid) after inserting food into the bowl.
NOTE: The cover (lid) must be securely locked into its position before operating the Mini
Food Chopper. When properly locked, the arrow inscribed on the handle of the cover (lid)
will align with the arrow inscribed on the base of the unit (near the ON/PULSE button).
Control Panel
This Mini Food Chopper has only one control, which is the ON/PULSE button. The ON/
PULSE button is used to turn the food chopper on and off. Push down and hold the ON/
PULSE button to begin chopping the food inside the bowl. To stop chopping, release the
ON/PULSE button.
AFTER SALES SUPPORT
888-525-6745
1
2
3
4
1. Cover
2. Blade Assembly
5
3. Bowl
4. Base
5. ON/PULSE Button
Controls & parts

Before the first use

service@kalorik.com

Use

5