Specifications - Sony STR-ZA5000ES Manual De Instrucciones

Specifications

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from 20 – 20,000 Hz; rated
120 watts per channel minimum RMS power, with no more than 0.09%
total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
1) 2)
POWER OUTPUT
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09%): 120 W + 120 W
Reference Power Output
(8 ohms 1 kHz, THD 0.9%)
FRONT: 130 W + 130 W
CENTER: 130 W
SURROUND: 130 W + 130 W
SURROUND BACK: 130 W + 130 W
HEIGHT 1: 130 W + 130 W
1) Measured under the following conditions:
Power requirements: 120 V AC, 60 Hz
2)
Depending on the sound field settings and the source, there may be
no sound output.
Frequency response*
SA-CD/CD, TV, AUX, VIDEO
Inputs (Analog)
SA-CD/CD, TV, AUX, VIDEO
* When "Direct" is being used and an analog input is selected.
20
US
10 Hz – 100 kHz
± 3 dB
Sensitivity: 150 mV
Impedance: 50 kohms
S/N*: 105 dB (A, 20 kHz LPF, 500 mV)
Inputs (Digital)
IN (BD/DVD) (Coaxial)
IN 1 (AUX), IN 2 (TV) (Optical)
Outputs
ZONE2, ZONE 3 (AUDIO OUT)
FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R, HEIGHT 1 L/R,
HEIGHT 2 L/R, SUBWOOFER
FM tuner section
Tuning range
87.5 MHz – 108.0 MHz
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
AM tuner section
Tuning scale
10 kHz step
9 kHz step
Antenna (aerial)
Loop antenna (aerial)
Video section
Inputs/Outputs
Video: 1 Vp-p, 75 ohms
Inputs
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohms
P : 0.7 Vp-p, 75 ohms
B
P : 0.7 Vp-p, 75 ohms
R
80 MHz HD Pass Through
Impedance: 75 ohms
S/N: 96 dB (A, 20 kHz LPF)
S/N: 96 dB (A, 20 kHz LPF)
Voltage: 2 V
Impedance: 1 kohm
Voltage: 2 V
Impedance: 1 kohm
Tuning range
530 kHz – 1,710 kHz
531 kHz – 1,710 kHz