Características Técnicas - Ecler EVO5 Manual De Instrucciones

13. CARACTERÍSTICAS TÉCNICAS
 AD/DA 24 bits converter 96kHz (default), 88.2kHz, 48kHz, 44.1kHz selectable.
 32/64bits DSP engine.
 Frequency response -1dB (-3dB):
Line:10Hz – (30kHz)
Micro: 10Hz – (28kHz)
Phono: RIAA  0.5dB (20Hz – 20kHz)
 Input sensitivity/Impedance:
Line: 0dBV/20k
Phono:-40dBV/50k
Micro: -50 to -30dBV / >1k
 Output level/Min. Load:
OUT1: 0dBV(+3, +6 dBV soft configurable) / 600
OUT2: 0dBV(+3, +6 dBV soft configurable) / 600
Output Limiter on OUT1 or OUT2: -10dBV to +10dBV 3 band compressor.
REC: 0dBV/10k, MIX or PFL routed via software.
Headphones: 0,2W/200, 1%THD
Midi: IEEE1394 / Din 5 180º
 THD+N:
Line:<0,006%
Phono:<0,01%
Micro:<0,01%
 Signal/N. Ratio:
Line:>100dB
Phono:>96dB
Micro:>95dB
 CMRR: Micro:>70dB@1kHz
 Talkover:
Attenuation: -6 to –30 dB (soft config.)
Release time: 0.5 to 3 sec. (soft config.)
 Micro. Noise Gate: -80dB to 0dB
 Micro. Compressor: 0 to 100% efficiency
 Xfader cutting time soft adjust: from –1mm to 8mm., left & right independently.
 Shape: Soft adjustable on Xfader, Faders & Dry-Wet.
 BPM: automatic from 60 to 220 bpm in 6 ranges, internal or MIDI clock reference.
 Firewire input routing levels: from -18 to 0 dB.
 Firewire output routing levels: from 0 to +18 dB.
34
www.audiovias.com