ELBE ALT-100-BT Manual De Instrucciones página 7

POWER SUPPLY
Connect the AC/DC adapter to the unit and the main power.
VOLUME LEVEL
Press VOL+/- button to adjust the volume level accordingly. Beep tones will be heard when Volume
Maximum is reached.
BLUETOOTH CONNECTION
This unit can receive stereo audio signal from a BLUETOOTH stereo audio source device.
1. Press and hold POWER button to turn the unit on.
2. Press BT button to turn on the BLUETOOTH feature (LED indicator rapid blinking).
3. Pair and connect to F-3088 on the BLUETOOTH audio source device. If prompted for passcode,
enter "0000".
4. Pairing successful (LED indicator blue), ready to stream music.
Note:
 Pairing mode is canceled (LED indicator yellow) about 1.5 minutes
 The above are generic steps to pair a BLUETOOTH device, for more specific instructions on
BLUETOOTH connectivity for your device, please consult your manufacturer's manual.
AUX IN
Follow below steps to connect the unit to another audio device like MP3 player and the like:
1. Connect the Audio Out of the device to AUX IN jack with audio cable.
2. Press and hold POWER button to turn the unit on.
3. Press AUX IN button to switch the unit to AUX mode.
4. Power on the device and begin playback.
IMPORTANT SAFETY INSTRUCTIONS
 The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
 When the AC/DC adapter is used as the disconnect device, the disconnect device shall remain
readily operable. To be completely disconnected the power input, the AC/DC adapter shall be
disconnected from the mains completely.
 No naked flame sources, such as lighted candles, should be placed on the apparatus.
 Minimum distances 2.0cm around the apparatus for sufficient ventilation. The ventilation should not
be impeded by covering the ventilation openings with items, such as newspapers, table-cloths,
curtains, etc.
 The use of apparatus is in tropical and/or moderate climates.
 The marking plate is located at the back of the apparatus.
GB-2