GB
Kitchen scales
Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference. The appliance
must only be used by persons familiar with
these instructions.
Familiarisation
1.
Weighing platform
2.
On/tare key
3.
Digital display
4.
Display selection key
5.
Rating label (on underside)
6.
Battery compartment (on underside)
Important hints
∙ If repairs are needed, please send the
appliance to one of our customer service
departments. The address can be found
in the appendix to this manual.
∙ Do not clean the scales with water and do
not immerse them in water.
∙ The display can be changed between
grams (gm), ounces (oz) and
millilitres (ml) by using the
The measurement of millilitres (ml) is
suffi ciently precise only when water
is being measured. When measuring
the weight of other types of liquid of a
different density, the results may deviate.
∙ These scales have a maximum load
capacity of 5300g. If this capacity is
exceeded, the symbol 'EEEE' appears in
the display.
∙ These scales are designed for household
use and are not suitable for medical or
commercial applications; they are not
offi cially calibrated.
6
Before using for the fi rst time
Before the scales are used for the fi rst
time, the batteries must be inserted as
described in the 'Batteries' section.
Operation
∙ Position the scales on a fi rm and level
∙ To weigh recipe ingredients, place a
∙ To switch the unit on, press the On/
∙ To add more ingredients without fi rst
∙ If the fi rst measurement is below 50 g,
key.
∙ After use, the scales may be switched off
Batteries
∙ The symbol
∙ To insert or replace the batteries,
surface.
suitable bowl or container on the platform.
Solid ingredients may be put directly onto
the scales.
tare key . At start-up the display
shows '0000'; it then changes to '0'
with the selected display format. Add
the ingredients to the bowl (or other
accessory) used, until the desired weight
is displayed.
emptying the container, the On/tare
key may be pressed again. The display
shows '0' and 'Tare'. In this way, only the
additional weight is displayed.
pressing the On/tare key will set the
weight back to '0'; however, the 'Tare'
sign does not appear in the display.
by holding down the On/tare key for 2-3
seconds. However, the unit will switch off
automatically if no key is pressed within a
60-second period.
need replacing.
open the battery compartment located
underneath the unit. When inserting the
batteries, always observe the correct
appears if the batteries