Getting Started; Wiring Diagram - Hama uRage Soundz 2.1 Essential Instrucciones De Uso

• Keep the packaging material out of the reach of
children due to the risk of suffocation.
• Dispose of packaging material immediately according
to locally applicable regulations.
• Do not modify the device in any way. Doing so voids
the warranty.
R
isk of electric shock
• Do not open the device or continue to operate it if
it becomes damaged.
• Do not use the product if the AC adapter, adapter
cable or power cable is damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to quali ed
experts.

4. Wiring diagram

5. Getting Started

5.1 Speaker
• Connect the two satellite speakers with the
corresponding audio outputs at the right side of the
subwoofer, as shown in the wiring diagram Point 4.
• Then connect the corresponding AUX audio input
with the signal source (computer/DVD/Blueray/MP3
player etc.), with the help of one of the enclosed
audio cables.
• Connect the subwoofer's power supply cable to an
undamaged electrical socket which has been installed
correctly.
Note
• Only connect the product to a socket that has been
approved for the device. The electrical socket must
always be easily accessible.
• When using a mult-socket power strip, make sure
that the sum power draw of all the connected
devices does not exceed its maximum throughput
rating.
• If you will not be using the product for a long
period of time, disconnect it from mains power.
LED1
VOLUME
LED2
BASS
AUDIO INPUT
R L
ON OFF
R L
AUDIO OUTPUT
~230V/50Hz
7