Sony MHC-V11 Manual De Instrucciones página 9

  (power) button
Press to turn on the system, or set
it to standby mode.
  (play)* button
— Press to start playback.
— When you hold down this button
for more than 5 seconds, the
built-in sound demonstration
will be played back. Press  to
stop the demonstration.
 (stop) button
— Press to stop playback. When
pressed twice, resume playback
can be canceled.
— Press to stop transfer during
music transfer.
— Press to stop the built-in sound
demonstration.
BLUETOOTH PAIRING button
— Press to select the BLUETOOTH
function.
— Hold down to activate
BLUETOOTH pairing in the
BLUETOOTH function.
BLUETOOTH indicator (page 21)
FUNCTION button
Press to select a function.

(USB) port
Use to connect a USB device.
MEGA BASS PARTY CHAIN
button (page 26, 30)
 Display
 VOCAL FADER button (page 31)
MIC ECHO button (page 31)
MIC LEVEL (MIN/MAX) knob
(page 30)

+/– (select folder) button
Press to select a folder on a data
disc or a USB device.
/ (go backward/go
forward) button
Press to select a track or file.
TUNING+/– button (page 17)
  (open/close) button
Press to open or close the disc
tray.

(N-Mark) (page 24)
 DJ OFF, FLANGER, ISOLATOR
buttons (page 27)
VOLUME/DJ CONTROL knob
— Turn to adjust the volume. You
cannot use this knob to adjust
the volume when DJ EFFECT is
selected.
— Turn to adjust the FLANGER and
ISOLATOR effect (page 27).
 Disc tray
 Remote control sensor
 MIC 1/2 jack
Use to connect the microphone(s).
* The  button on the unit has a tactile
dot. Use the tactile dot as a reference
when operating the system.
9
GB