About The Pc Card; Notes On Use - Sony DPP-EX7 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

About the PC card

The printer can read and write a PC card
(PCMCIA ATA compatible type II flash
memory cards with a power
specification of 5V or 3.3/5V). By using
a commercially available PC card
adaptor, you can also use Smart Media
and other types of compact flash
memory cards.

Notes on use

• You cannot use PC cards with a
power specification of 3V (3.3V)
only.
• Do not insert other types of PC card
into the printer's insertion slot. The
printer may be damaged.
• Do not drop, bend, or submit the PC
card to external shock.
• Do not disassemble or modify the PC
card.
• Avoid getting liquids on the PC card
or using them in areas subject to high
humidity. Otherwise, data may be
rendered unreadable.
• Avoid using or storing the PC card
in a location subject to:
– extremely high temperature such as
the hot inside of a car or the
outdoors exposed to a direct
sunlight, or a place near a heater.
– direct sunlight
– high humidity
– corrosive substances
– excessive dust
– electrostatic or electronic noises
– magnetic fields
• When storing and carrying the PC
card, keep it in its original case to
ensure protection of important data.
• Avoid removing the PC card from
the insertion slot or turning off the
power of the printer while the
printer is accessing the PC card.
Otherwise, data may be rendered
unreadable.
• When using a compact flash card or
Smart Media, use a commercially
available PC card adaptor that is
compatible with the card. Insert the
card into the adaptor and then insert
it into the printer. For how to install
the card and adaptor, refer to the
operating instructions of the PC card
adaptor.
• Avoid inserting or removing the
compact flash card or Smart Media
into or out of the PC card adaptor
while the PC card adaptor is inserted
in the printer. The data may be
rendered unreadable or erased.
89
GB

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido