Recording With Digital (Optical) Input (Optical Cable Required) - Sony MZ-B100 Manual De Instrucciones

Recording with digital
(optical) input (optical cable
required)
Connect to a digital source using an
optical cable (not supplied) to make
digital recordings. Digital recording is
possible even from digital equipment with
different sampling rates, such as a DAT
deck or a BS tuner, using the built-in
sampling rate converter.
CD player, MD
player, digital
amplifier, etc.
Optical
plug
POC-15B etc.
(not supplied)
to LINE IN
(OPTICAL)
1
Insert a recordable disc.
2
Press REC MODE repeatedly until
"STEREO", "LP2", "LP4", or
"MONO" lights up in the display.
For details on the recording mode, see
"Recording for long times" (page 16).
20
-GB
Portable CD
player, etc.
Optical
mini-
plug
POC-15AB etc.
(not supplied)
REC
indicator
REC
MODE
zREC
3
Press zREC.
"REC" appears in the display, the
REC indicator lights up, and the
recording starts.
4
Play the source sound.
For other operations on recording, see
"Recording an MD right away!"
(page 11).
z
When recording from digital media, track
marks in the original are copied automatically
to the MD.
Notes
• You can make a digital recording with an
optical cable only from an optical type output.
• When recording from a portable CD player,
play it on AC power and disable the anti-skip
function (such as ESP*).
• When recording from a portable CD player,
pause the CD player before doing the
recording procedure.
• Digital output may be disabled on some
portable CD players when the AC power
adaptor is not connected to the player.
• A track mark is added at the point where you
press the XPAUSE button again to resume
recording while pausing recording; thus the
remainder of the track will be counted as a
new track.
∗ Electronic Shock Protection