Transporting the unit
Preparation
Disconnect all connected devices and cables from the
unit.
Lighting plate
Note:
•
More than one person is required to move, tilt or carry the
unit.
•
Keep the unit at least 10 mm away from other objects for
proper ventilation.
•
Put the unit on a flat safe surface.
•
The speakers do not have magnetic shielding. Do not put
them near PCs or other equipment easily influenced by
magnetism.
•
The audio output is
multidirectional. Do not
obstruct the speakers with
any object that may decrease
the sound quality.
•
The subwoofer is located at
the front and rear of the unit.
Keep the rear of the unit at
least 10 cm away from a wall
for better sound quality.
•
When you play at high levels
for a long period, it can cause
damage to the speakers and
decrease the life of the speakers.
•
Decrease the volume in these conditions to prevent
damage:
–
When the sound is distorted.
–
When you adjust the sound quality.
4
4
CAUTION!
• Improper handling or transportation manner may
cause the unit to fall, etc., resulting in damage
and/or personal injury.
• Do not transport the unit by holding the lighting
plate as this may damage the lighting plate.
• Do not put any object on the top panel of the unit.
• Do not stack any object on the unit.
• Do not allow children to climb on the unit.
• Be careful when babies or children are near.
Maintenance
To clean this system, wipe with a soft, dry cloth.
• Disconnect the AC mains lead to reduce the risk of fire,
electric shock or product damage.
• Never use alcohol, paint thinner or benzine to clean this
system.
• Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
Preparing the remote control
Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.